Effects of different drying methods on the physicochemical property and edible quality of fermented Pyracantha fortuneana fruit powder

In this study, hot air drying (HAD), hot air-/microwave-assisted vacuum drying (HAMAVD) and hot air-assisted microwave drying (HAAMD) were applied to lactic acid-fermented Pyracantha fortuneana fruit (PFF). Influences of different drying methods on fluidity and dispersion, microstructure, hygroscopicity, rehydration, colour change, sourness and energy consumption were investigated. Results showed that HAAMD had the best overall performance on the quality of the PFF powder. HAAMD PFF powder had higher expansion force (1.65 mL g⁻¹) and water-holding capacity (2.68 g g⁻¹), lower degree of compression (9.09%) and energy consumption, smaller colour change and better taste. Organic acids (mainly malic acids) of all drying powders decreased, but HAAMD and HAMAVD could better improve the acidity characteristics of PFF powders, which may be related to the drying time and the temperature change processes. Consequently, this study can provide references for the utilisation of fresh PFF, the design and commercialisation of PFF-related products.     

Comparison of OWAS,RULA and REBA for assessing potential work-related musculoskeletal disorders

This study compared three representative observational methods for assessing musculoskeletal loadings: Ovako Working Posture Analysis System (OWAS), Rapid Upper Limb Assessment (RULA), and Rapid Entire Body Assessment (REBA). The comparison was based on 209 cases of upper-body musculoskeletal disorders (MSDs) diagnosed by medical doctors. The most awkward/stressful posture in each participant's tasks was assessed using these techniques. Postural loadings were rated more highly by the RULA than by the OWAS and REBA (p < 0.01). The chi-square test and logistic regression analysis showed that only RULA grand score and action level, and REBA action level were associated with MSD work-relatedness (p < 0.01, p < 0.05, and p < 0.05, respectively). The percentage concordant values of the logistic model for the RULA grand score and action level were 52.4% and 44.8%, respectively, while the percentage concordant value for the REBA action level was 22.1%. Therefore, the RULA may be the best system for estimating the postural loads and work-relatedness of MSDs.Relevance to industryWork-related musculoskeletal disorders are the leading cause of workplace disability in the developed countries. For preventing the disorders, quantification of musculoskeletal loads is required.     

基于限定PSO初始化空间的随机最大似然算法

针对随机最大似然算法（SML）在波达方位（DOA）估计中由于多维非线性优化导致计算复杂度大的问题，提出一种限定粒子群（PSO）算法搜索空间的SML算法。该算法克服了一个缺陷，即在采用ESPRIT算法限定PSO初始化空间时，在阵列结构是非均匀线性阵列而且信号是相干信号时ESPRIT算法不能直接处理信号，且需要采用一组预处理技术，这增加了算法计算的复杂度。提出的算法的关键之处在于采用假设技术确定初始化点来代替ESPRIT算法的解，结合克拉美罗界（CRB）确定PSO算法的初始化解空间。这一方法不必再采用预处理技术，且利用限定PSO初始化空间的算法大大降低了SML算法的计算复杂度。实验结果表明，提出的算法为相干情况和非相干情况都提供了相当好的初始值。最后，将该算法与许多现有算法进行比较，验证提出算法的有效性和准确性。     

光学球罩数控抛光工艺关键技术研究

光学球罩被广泛应用于各类光电系统中,其面形精度制约着光电系统的成像质量。随着数控技术的发展,数控加工技术逐渐成为目前光学加工行业的主流发展方向。基于高质量的铣磨表面,为了能够在准球心高速抛光工艺中实现等去除量加工,本文对同步抛光技术进行了理论分析及数学模型推导,并通过实验证明,同步抛光技术可以有效地提升加工效率,获得高质量的光学表面。     

Corrosion Protection of AA2024-T3 by Cerium Malate and Cerium Malate-Doped Sol-Gel Coatings

Cerium malate (CeMal) was tested as a corrosion inhibitor for AA2024-T3 in this work. Corrosion inhibition on bare AA2024-T3 indicated that the inhibiting effect was a result of the synergistic effect of cerium cations and maleic anions. The corrosion of AA2024-T3 was stagnated by greatly reducing the corrosion current when CeMal was present in NaCl solutions. CeMal was adsorbed on the surface of AA2024-T3 forming a protective film in the initial stage. Then, cerium cations transformed to cerium oxide/hydroxides, precipitating on the cathode sites to inhibit the further corrosion. The electrochemical impedance spectra results of the sol-gel coatings proved that CeMal was an effective corrosion inhibitor in the sol-gel coatings to provide corrosion protection for AA2024-T3.     

Effect of apple cider vinegar agent on the microstructure,phase evolution,and magnetic properties of CoFe2O4 magnetic nanoparticles

In the present study, spinel structure CoFe₂O₄ nanoparticles were successfully synthesized by the sol-gel auto-combustion technique. The effect of apple cider vinegar (ACV) addition as an organic biocompatible agent on the size, morphology, and magnetic properties of CoFe₂O₄ nanoparticles was investigated in detail. The phase evolution, particle size, and lattice parameter changes of the synthesized phase have been estimated by using Rietveld structure refinement analysis of X-ray powder diffraction data. Also, Fourier transform infrared spectra (FT-IR) of the samples verified the presence of two expected bands correspond to tetrahedral and octahedral metal-oxygen complexes within the spinel structure. Furthermore, microstructural observations revealed that ultrafine particles have a semi-spherical morphology. It was shown that the particles size decreased from ~45 to ~17 nm with an increase in the amount of ACV. Magnetic properties were carried out by vibrating sample magnetometer (VSM) at room temperature. Both the saturation magnetization (M_s) and coercivity (H_c) were found to be significantly dependent on the crystallite size and the amount of ACV.     

靶面激光光斑尺寸原位测量的研究

提供了一种简便易行的靶面激光光斑尺寸原位测量的方法。从高斯光束的横向光强分布特性出发,建立了激光烧蚀斑半径与辐照激光能量、光斑尺寸、烧蚀阈值间的关系式,模拟分析发现辐照激光光斑尺寸对烧蚀斑半径随辐照能量变化曲线有较大影响。对于脉宽为2 ms,波长为1064 nm的激光,实验测量了不同能量激光辐照下相纸烧蚀斑半径,并用推导出的关系式拟合测量数据,获得了靶面处光斑尺寸和样品烧蚀阈值。同时,也测量了不同位置处的光斑尺寸和样品烧蚀阈值,对高斯光束束腰位置和样品烧蚀阈值的光斑尺寸效应进行了验证。研究结果表明该技术结果可靠,简单高效。该技术可以为高能激光与固体物质相互作用的基础研究和激光加工等应用领域中实现简单方便地测量靶面光斑尺寸提供帮助。     

The influence of the waveguide on the quality of measurements with ultrasonic Doppler velocimetry

The article is devoted to the study of the influence of geometric parameters of sound-conducting walls on the quality of measurement of liquid metal flow velocities by ultrasonic Doppler velocimetry. It was shown that the thickness and radius of a sound-conducting wall (waveguide) have a notable effect on the resulting velocity profiles. The flow in a round pipe, the length of which is much larger than its diameter, is considered as a reference flow. The positive effect of a stepwise waveguides with a diameter smaller than the diameter of the piezoelectric element of an ultrasonic transducer on the quality of velocity measurements was verified experimentally. It was found that the accuracy of the resulting velocity profiles largely depends on the length and the material of the waveguides, as well as the velocity of the incoming flow of liquid metal.     

Oxy-fuel combustion of heavy oil based on OH - PLIF technique

Oxy-fuel combustion of heavy oil can be applied to oil field steam injection boilers, allowing the utilization of both heavy oil and CO₂ resources. This paper studied the local distribution characteristics of OH on oxy-fuel combustion of heavy oil during the ignition and stable combustion processes. During the ignition process, we observed the generation and evolution of fire kernel, and got the flame propagation velocity. During the stable combustion process, the results showed that the OH distribution and its relative signal intensity were influenced by the oxygen concentration, excess air coefficient, gas flow, reaction atmosphere, oil mist scattering, incident laser energy and laser sheet position. In the same reaction atmosphere, the ranges of OH dense distribution and the high temperature area increased as O₂ concentration increased. In the same O₂ concentration, both the ranges of OH dense distribution and the high temperature area in O₂/N₂ were larger than that in O₂/CO₂. In 29% O₂/71% CO₂, the flame shape was similar to combust in air, while the OH relative signal intensity and its volatility were much larger than that in air. In the same combustion condition, the location of high concentration of OH relative concentration field lagged behind the high temperature area. The results further reveal the differences between the conventional and oxy-fuel combustion.     

Flow pattern identification and measurement techniques in gas-liquid-liquid three-phase flow: A review

The simultaneous flow of gas, oil, and water forms various flow patterns due to the complex interfacial relationships. Three-phase flow patterns are classified as the gas-liquid and liquid-liquid flow patterns. Pressure drop, void fraction, liquid holdup, and phase distribution are important characteristics of the three-phase flow. These characteristics are generally associated with the three-phase flow patterns. Hence, the knowledge about flow patterns can help to predict the overall behavior of the three-phase flow. Studies have been conducted to identify three-phase flow pattern and their characteristics at various superficial velocities of gas, oil, and water. The major purpose of the studies is to gather information about the three-phase co-current flow and use it for improvement of the efficiency of the flow systems. Therefore, the accuracy of the measurement technique is critical. Several types of flow pattern identification and measurement techniques have been developed to improve accuracy and provide high-quality results. In this article, classical and advanced techniques used for the three-phase flow identification and measurement have been reviewed. The survey will help the researchers working in the area of multiphase flow to choose the right technique based on the objectives of the studies.